top of page

WillowCreek, Quuppa and Infrafon: One Duress Platform, and a Standard to Test It

3 days ago
5 min read

WillowCreek, Quuppa and Infrafon CC2 as one duress platform: location, badge and control room. Part 5 of 5, inTechnology Distribution

Quick answer: A complete Bosch Security Escort replacement needs three layers: a location network, a device staff wear, and control room software that receives, escalates and records every alarm. inTechnology brings them together as one solution: Quuppa for sub-metre, Wi-Fi-independent location, the Infrafon CC2 badge for staff, and WillowCreek Guardian as the duress and lone worker platform, designed, installed and supported by inTechnology in Australia. To measure any system, ours included, we are helping develop the MDS standard (draft AS/NZS 5765.1), open for public comment until 14 December 2026.

Key facts

  • Location: Quuppa BLE Angle of Arrival, typically within about a metre, on its own network.

  • Device: Infrafon CC2 duress badge, 50 g, pull-alert, man-down detection, ePaper display, NFC.

  • Platform: WillowCreek Guardian, the control room, escalation, handset app and audit layer.

  • Delivery: inTechnology Distribution designs, installs, cuts over and supports the whole system.

  • Standard: draft AS/NZS 5765.1 (MDS standard) covers mobile duress systems and wearable devices. Consultation closes 14 December 2026 at https://mds-standard.rtlsintelligence.com

One party accountable from the button to the screen

In Part 2 I described the night an alarm does not arrive and everyone points at someone else. The answer is a solution where each layer is chosen to work with the others and one partner stands behind all of it.

Layer

Partner

What it does

Location network

Quuppa

Locates every badge by Angle of Arrival, on a standalone network that does not depend on Wi-Fi

Staff device

Infrafon

CC2 badge: duress button, pull-alert, man-down, ePaper display, NFC access

Platform

WillowCreek

WillowCreek Guardian: alarm handling, escalation, maps, handset app, lone worker, audit

Delivery and support

inTechnology

Design, install, parallel-run cutover, integration and ongoing support in Australia

What WillowCreek Guardian adds

The location network says where. The badge says who and when. The platform decides what happens next.

Built for the control room. Alarms arrive with a name, a role and a room on a real floor plan, then climb an escalation ladder until a human acknowledges them. Every step is time-stamped for the audit trail.

Honest feedback to the person in trouble. On the WillowCreek handset app, an alarm moves through three clear states: sending, received by control room, and help is coming, which only appears when a person (not a server) has acknowledged it. Staff who can see their alarm has landed do not panic-press or give up.

Privacy by design. If the control room opens the camera, the worker is always told. A safety tool that can silently watch staff is a surveillance tool, and staff will treat it as one.

Indoors and out. Indoors, location comes from RTLS such as Quuppa. Outdoors, the handset uses GPS. The worker can always see which one the control room is relying on, and the system never shows a stale position as if it were live.

Duress and lone worker as one problem. Most organisations buy duress and lone worker check-ins separately: two apps, two consoles, two rosters. WillowCreek Guardian treats them as one platform with one alarm path and one audit trail.

Your infrastructure, your data. WillowCreek Guardian runs as a dedicated appliance on the customer's own infrastructure, with individual sites as separated tenants. It connects through a REST API, webhooks and an event stream, and notifies through the console, SMS gateway, and TAP and ESPA paging.

Vendor-agnostic location. WillowCreek Guardian ingests location through an adapter model, so sites with an existing RTLS investment are not forced into rip and replace.

We do not describe anything as proven until it has been proven on site. That is why every WillowCreek engagement starts with a short proving deployment: one team, real shifts, your escalation ladder and control room, running alongside your current system rather than instead of it.

Why Australia needs a standard

For decades, Australian sites have bought duress systems on the strength of the brochure. There has never been a proper Australian standard that says what good looks like for mobile duress, or how to test it.

That is why we have been helping develop the MDS standard, now a draft Australian and New Zealand standard, AS/NZS 5765.1. It:

  • covers the whole system and the wearable devices staff carry, not just one component;

  • builds on the German VDE standards, among the toughest in the world for personal emergency signalling;

  • turns "does it work?" from a sales claim into a defined set of tests carried out in realistic conditions.

Public consultation is open until 14 December 2026. If you work in corrections, forensic mental health or hospital security, your experience running Security Escort is exactly what the standard needs. Have your say at https://mds-standard.rtlsintelligence.com

The series in one paragraph

Bosch Security Escort reaches end of support on 31 December 2026 (Part 1). Keeping the old Bosch hardware under new software is a band-aid, and we learned that the hard way at Gawler and Port Pirie (Part 2). A real replacement locates alarms to the right room or cell on its own network, and cuts over area by area with no gap in cover (Part 3), using a badge designed for mental health and corrections (Part 4). WillowCreek, Quuppa and Infrafon bring it together as one platform, measured against a proper Australian standard (Part 5).

Frequently asked questions

What is WillowCreek Guardian? WillowCreek Guardian is a mobile duress and lone worker safety platform covering the control room console, escalation, a themed iOS and Android handset app, indoor and outdoor location, and a full audit trail. It runs on the customer's own infrastructure.

How do WillowCreek, Quuppa and Infrafon work together? Quuppa locates staff badges to within about a metre on a standalone network, the Infrafon CC2 is the badge staff wear, and WillowCreek Guardian receives, escalates and records every alarm. inTechnology delivers and supports the combined system in Australia.

What is AS/NZS 5765.1? A draft Australian and New Zealand standard for mobile duress systems (the MDS standard), covering both systems and wearable devices. Public consultation closes 14 December 2026.

Does WillowCreek Guardian work with RTLS systems other than Quuppa? Yes. It uses a vendor-agnostic adapter model for indoor location, and GPS on the handset outdoors.

How do we start? With a short proving deployment alongside your existing system, producing evidence from real shifts before any wider rollout. Contact inTechnology at intechnology.com.

The full series

Related reading

Mark Winter leads inTechnology Distribution and has worked in mobile duress for more than 25 years across hospitals, mental health and corrections. If you are working through a Security Escort replacement, call us. We are always happy to talk it through.

 
 
 

Comments


bottom of page