top of page

Bosch Security Escort Replacement: Why Keeping the Old Hardware Is a Band-Aid

2 days ago
5 min read

Bosch Security Escort replacement: why a drop-in replacement is only a band-aid on end-of-life receivers. Part 2 of 5, inTechnology Distribution

Quick answer: A "drop-in" Security Escort replacement keeps the existing Bosch receivers, cabling and transmitters and replaces only the control room head end. It looks cheaper and less disruptive, but the Bosch hardware is the part going end of life on 31 December 2026. You keep the old accuracy, you keep parts that cannot be replaced, and you end up paying twice. We installed a drop-in system at two South Australian public hospitals, decided it did not meet the standard we expect, removed it at our own cost and replaced it with Quuppa.

Prefer to listen? This article accompanies Episode 2: A Band-Aid, Not a Fix of Mark's podcast series on replacing Bosch Security Escort.

Key facts

  • A drop-in replacement changes the head end (control room software) only.

  • The receivers and transmitters stay, and those are end of life too.

  • Alarm location accuracy depends on the receivers, so it does not improve.

  • inTechnology installed a drop-in system (Actall) at Gawler and Port Pirie hospitals in South Australia, did not take it live, removed it at its own cost (tags included) and replaced it with Quuppa. Both hospitals are now live on Quuppa.

  • Whyalla hospital, also in South Australia, evaluated the same drop-in approach and chose Quuppa instead.

Why the drop-in option is appealing

I want to be fair here, because I understand the appeal completely. You are running a project on a live site with a tight budget, and someone says: keep your cabling, keep your receivers, swap the server, far less disruption. Government buyers have told me that is exactly what caught their eye.

On paper it makes sense. In practice it does not solve the problem you set out to solve.

The reason you are replacing Security Escort is in the ceiling

Bosch is not only walking away from the software. The receivers, the transmitters staff wear, all of it, goes end of life together.

Put new software on top and you have fixed the one part you can see: the server in the control room. Everything that made the replacement necessary is still installed above the ceiling tiles.

Then the predictable happens:

  1. A receiver fails, and there is nothing supported to replace it with.

  2. Transmitters wear out, and Bosch is not making new ones.

  3. Sooner or later, you replace all the hardware anyway.

You pay for the replacement twice.

Two problems people miss

Accuracy does not change. Where an alarm appears on the screen depends on which receivers heard it. Keep the old receivers and you keep the old accuracy, however modern the new screen looks. If your corrections team needs to know which cell, a new head end on old receivers will not get you there.

Nobody owns the failure. Picture the night an alarm does not come through. The software company says it is the hardware. The hardware has nobody behind it anymore. With a duress system you want one party accountable from the button to the screen.

What happened in South Australia

This is not theory. We lived it.

We partnered with Actall, we believed in it, and we installed it at Gawler Hospital and Port Pirie Hospital as the replacement for Security Escort.

It did not meet the standard we expect from a duress system. So we did not switch it on.

That was a hard call. The equipment was in. The customer was expecting to go live. The easy thing would have been to hand it over and move on to the next job. But I have seen too many systems that looked great in the brochure and then failed the one time someone needed them, and I was not going to put my name on that.

So we pulled it out at our own cost, tags included, and installed Quuppa. In more than twenty-five years I had never had to do that. It cost us a lot of money. I would do it again tomorrow.

Both hospitals are now live on Quuppa. Whyalla Hospital, which had been looking at the same approach, chose Quuppa as well.

This is about architecture, not a brand

I want to be clear that this is not personal. Any option that keeps end-of-life hardware in the safety chain has the same weakness, whoever's name is on the box. You have not replaced Security Escort. You have given it a new face.

Five questions to ask every vendor (including us)

  1. After you are installed, what on my site is still end of life?

  2. If a receiver fails in year two, what do you put back?

  3. What accuracy will I get, tested in my building, not in a brochure?

  4. Who is accountable from the button to the screen when an alarm goes missing?

  5. Where are you running today in Australia, and can I call them?

Frequently asked questions

What is a drop-in Security Escort replacement? A system that reuses the existing Bosch Security Escort receivers, cabling and transmitters and replaces only the head-end software in the control room.

Does a drop-in replacement solve Bosch end of support? Only for the head end. The receivers and transmitters remain end-of-life Bosch hardware with no supported replacement parts after 31 December 2026.

Will a new head end improve alarm accuracy? No. Location accuracy is determined by the receiver network that hears the alarm. Keeping the old receivers keeps the old accuracy.

Which South Australian hospitals replaced a drop-in system with Quuppa? Gawler Hospital and Port Pirie Hospital, where inTechnology removed an installed Actall system at its own cost and replaced it with Quuppa. Whyalla Hospital also chose Quuppa.

Next in the series

Part 3: What a real replacement looks like. How Quuppa delivers sub-metre, cell-level duress alarms on its own network, and how to change over without a single shift losing cover.

The full series

Related reading

Mark Winter leads inTechnology Distribution and has worked in mobile duress for more than 25 years across hospitals, mental health and corrections. Planning a Security Escort replacement? Get in touch at intechnology.com.

 
 
 

Comments


bottom of page