Infrafon CC2: The Duress Badge Built for Mental Health and Corrections

Quick answer: The Infrafon CC2 is a mobile duress smart badge from Infrafon (Freiburg, Germany). It weighs 50 g, measures 54 x 90 x 9 mm, is rated IP65 and drop-tested to 2 m. Staff raise an alarm with a button or a pull-alert duress activator, and the badge can raise one automatically on prone or immobile (man-down) detection. It has a 2.7 inch ePaper touch display, NFC for access control, vibration and voice alerts, and on a Quuppa network it is located by Bluetooth Angle of Arrival. inTechnology uses it as the staff device in Quuppa-based Security Escort replacements.
Key facts
Specification | Infrafon CC2 |
Size and weight | 54 x 90 x 9 mm, 50 g |
Protection | IP65, fall resistant to 2 m |
Alarm triggers | Tactile buttons, pull-alert duress activator, prone/immobile (man-down) detection |
Display | 2.7 inch ePaper touch screen, 264 x 176 |
Location | Quuppa BLE AoA (other radio options depending on configuration) |
Feedback | Vibration, voice and buzzer alerts, red/green LED |
Access control | NFC (Type 4 tag emulation) |
Battery | 440 mAh rechargeable LiPo, USB-C, desktop and multi-charger |
Firmware | Over the air or local USB |
Certification | CE, FCC, IC, RCM, RoHS |
Source: Infrafon CC2 datasheet.
Why the badge matters as much as the network
You can have the most accurate location network in the country, and it means nothing if staff will not wear the device, cannot activate it under pressure, or find it dead when they need it.
When we replace Bosch Security Escort, we are replacing the transmitters staff wear every shift as well as the receivers in the ceiling. Those Bosch transmitters are end of life too. The device that replaces them has to be designed for the environments Security Escort lived in.
What mental health and corrections demand
In mental health units, forensic facilities and prisons, a duress device has to meet a tougher brief than in a general ward:
It must be hard to use as a weapon or a ligature point. A slim, flat badge with no protruding hardware is a deliberate design choice, and how it is worn (clip, lanyard type, breakaway) needs to be agreed with each site's own risk team.
It must stay put. A device that falls off in a struggle is not protecting anyone.
It must work when you cannot look at it. A pull-alert activator and physical buttons let staff raise an alarm by feel.
It must raise an alarm for you if you cannot. Man-down detection covers the worst case: someone on the floor who cannot press anything.
Things staff and managers notice
Two-way feedback. Vibration, voice and LED feedback tell the wearer their alarm has gone, which stops the "did it work?" second press.
A screen that is readable anywhere. ePaper is legible in bright light and uses almost no power.
One badge, more than one job. NFC access control means the duress badge can also open doors for authorised staff, so there is one device on the lanyard instead of two.
Health you can see before it matters. Each badge reports its own battery and status, so a device needing attention is flagged before someone depends on it.
How it fits the replacement
On a Quuppa network, the CC2 is located by Bluetooth Angle of Arrival, so an alarm from the badge lands in the right room or cell, typically to within about a metre (see Part 3). The badge talks to Quuppa Locators, not to the site Wi-Fi, so duress keeps working whatever the IT network is doing.
The control room software that receives the alarm, escalates it and records it is covered in Part 5.
Frequently asked questions
What is the Infrafon CC2? A mobile duress smart badge made by Infrafon in Germany, combining duress alarm, man-down detection, location, an ePaper display and NFC access control in one 50 g device.
Does the CC2 have man-down detection? Yes. It can trigger an alarm on prone or immobile detection, as well as from its buttons and pull-alert activator.
How long does the CC2 battery last? The CC2 uses a rechargeable 440 mAh LiPo battery charged by USB-C, desktop or multi-bay charger. Real-world life depends on configuration and alarm traffic, so we confirm it per site during the proving phase.
Can the CC2 replace Bosch Security Escort transmitters? Yes, as part of a full replacement. The CC2 replaces the end-of-life Bosch transmitters, and a Quuppa network replaces the end-of-life receivers.
Is the CC2 suitable for mental health and corrections? It was designed for healthcare and high-risk environments: slim, light, IP65 and drop resistant, with physical activation and man-down detection. Wearing method is agreed with each site's risk team.
Next in the series
Part 5: One platform, one standard. How WillowCreek Guardian, Quuppa and Infrafon come together as one duress solution, and why Australia needs the MDS standard (draft AS/NZS 5765.1).
The full series
Part 1 of 5: Bosch Security Escort End of Support: What 31 December 2026 Means
Part 2 of 5: Bosch Security Escort Replacement: Why Keeping the Old Hardware Is a Band-Aid
Part 3 of 5: Quuppa for Mobile Duress: What a Real Security Escort Replacement Looks Like
Part 4 of 5: Infrafon CC2: The Duress Badge Built for Mental Health and Corrections (you are here)
Part 5 of 5: WillowCreek, Quuppa and Infrafon: One Duress Platform, and a Standard to Test It
Related reading
Mark Winter leads inTechnology Distribution and has worked in mobile duress for more than 25 years. Want to see a CC2 on a live Quuppa system? Get in touch at intechnology.com.




Comments